Tips And Tricks for Bowhunting in A Ground Blind
By: Heath Wood
One of the biggest challenges bowhunters face is getting close enough to an animal to shoot accurately. This challenge thrills a bowhunter and drives them to put in hard work each season.
When a hunter is trying to get an animal into a comfortable shooting range, they must devote the time and effort to get a result that ends in their favor. The required efforts include scouting, hanging tree stands, and putting up permanent box blinds. However, many of today’s hunters are hunting from a portable ground blind. When these efforts result in a mature buck on the ground, the hunter feels a rush of excitement that comes from getting an intelligent and respected animal into archery range.
Portable ground blinds have an array of advantages when used to get archery close to deer. Hunters can better stay concealed, resulting in a more versatile hunter that can move wherever the deer movement is the most predictable. Other advantages include having more room to draw a bow, staying out of mother nature’s elements, and the list goes on. The point of the matter is, more bowhunters are using ground blinds than ever before. Below are a few tips and tricks when using a blind on your next archery hunt.
Have The Proper Bow & Setup
One of the common excuses for not using a ground blind is not having enough room to draw a bow correctly and make the shot. Two tips will result in having the proper setup to shoot a bow correctly while in a ground blind. One is making the right choice on the ground blind itself. It is vital to choose a ground blind that has plenty of room horizontally and vertically. The hunter needs to have space to fit a chair, all their gear, and enough room to draw their bow to full draw without hitting or rubbing against the blind. If there is not adequate room, one can spook deer by hitting the blind while trying to draw or, even worse, having interference that may cause a poor shot that could wound an animal or make the hunter miss entirely.
The Muddy Prevue 3 is an excellent choice of ground blind for the bowhunter. The Prevue 3 is rated as a three-person ground blind with a 73” by 73” shooting width, 58” x 58” footprint, and a standing height of 66”. The large area of the Muddy Prevue 3 makes it ideal for the bowhunter to have more than enough room to draw and shoot without any deflections. Another great feature of the Muddy Prevue 3 blind is the two full-width panoramic windows of one-way see-through mesh. The sizeable see-through mesh window allows the hunter a wider field of view of their surroundings, allowing them to know the exact time to draw on a deer when approaching.
The second part of a proper setup is to have the right bow and accessories. Even with a larger area inside, shooting a bow from a blind narrows room for movement. It is vital to use a bow with a smaller axle to axle measurement or a crossbow to ensure there is more than enough room to shoot. I use the Bear Archery Whitetail Legend bow for hunting inside of ground blinds. The Whitetail Legend has excellent maneuverability by featuring a 32” axle-to-axle measurement. With the smaller height bow, I can move around in the blind to get into position for the shot without bumping the blind. Another must-have when hunting inside a blind is a well-illuminated sight, such as the Apex Gear MAGNITUDE series. The MAGNITUDE five-pin sight features the PRO-BRITE pin design that increases brightness without crowding the sight picture. A shooter’s ring design has better peep sight alignment and glow-in-the-dark visibility, perfect for shooting inside of a dark blind.
Placement Of Ground Blind
A ground blind has long been used for sitting in open areas where visibility is more significant. However, when setting up for bow hunting deer, one must be more specific to where the blind is set up. As a rule of thumb, most bowhunters have an accurate shooting range of forty yards or less. Many of today’s bowhunters can shoot accurately at father distances, yet it is forty yards or less on average. To guarantee the blind is in the correct position, use a range finder and place the blind near objects or areas where deer will be. When setting up a ground blind for bowhunting, I find natural areas such as travel, water, and food sources. When I find natural areas, I try to narrow down where deer will travel within forty yards or less when passing by. To narrow down the area, I try to locate where deer enter the food source or what point of a water source deer come to most often. I look for other points of natural interest barriers, such as a log or a fence that narrows down a deer’s travel route.
Another great way to narrow deer within the shooting range of a blind is by using an attractant to draw deer to a specific spot. For example, using deer decoys to help lure deer within range. When setting up a decoy, I use my Halo XL450 rangefinder to range exactly twenty yards from my blind, then place the decoy into position. By having a decoy at twenty yards, I know when a deer gets nearby the decoy, it is well within comfortable shooting range. Another attractant a hunter can use is a deer scent on a wick or in a mock scrape. On many occasions, I have used scents such as Buck Bombs 2 Hot Does liquid that comes with a scent wick to hang on a tree limb or brush nearby the hunting area. Another attractant to draw deer within a specific range is Doe in Estrus, used with a Scent Hammock over a mock scrape. Either scent choice gives a specific location for a deer to come.
The challenge that invokes the drive for bowhunters to put so much work into a blind and bow set up and take the proper steps to ensure they are within bow range is time and effort well spent when it creates the perfect scenario to close the deal on a trophy buck.
thanks for the advice. my one and only bow hunt was a total disaster. I did not know anything and just winged it.