Posts

Muddy’s Trail Camera Schedule | Setups, Tips, Settings, and More

Trail Camera Tips | Muddy’s Trail Camera Schedule

If you’re like many hunters, your trail cameras are probably in full swing right about this time of the year. Early bow hunting seasons aren’t that far off, and bucks are starting to look pretty enticing when they pose for a portrait. But once the fall hunting season is finished, do you pack your cameras up and quit until next summer? Most people do, and they’re missing out on a lot of critical information about the deer they hunt. Here’s a comprehensive trail camera schedule you can use to keep tabs on the deer herd throughout the entire year.

But first, what can you learn from an annual trail camera schedule? Plenty. In the winter, you can keep tabs on deer to see which bucks made it through the hunting season and help you plan for next year, plus you might even find some shed antlers in the process. Spring means lots of new deer hitting the woods, so you can watch your clover fields as they fill up with pregnant or nursing does and bucks trying to recover from the winter. In the summer, you can watch bucks as they start to grow their antlers and develop a hit list for the current season. And then, of course, you know what fall means – lots of opportunities to learn where deer are bedding and feeding so you can put all of that trail camera work to good use and hopefully arrow a buck.

October Trail Camera Schedule

Conditions

Cooler weather, great fall scenes, and lots of deer action all combine to create the most magical time of the year for deer hunters. But there’s a lot happening for deer and their habitats in October. For one, bachelor groups should all be split up as bucks shift ranges and get more competitive and aggressive with one another. The native vegetation should be drying up and most crops are starting to be harvested, which is reducing or changing their food sources to acorns, apples, and waste grain. Leaves fall in autumn, which drastically changes summer bedding areas and movement patterns. On top of it all, there are more hunters out in the woods to pressure deer. When all of these things combine, it’s what many people call the October lull. The best time to hunt the October lull is absolutely during and right after a cold front, which gets the bucks on their feet and moving around again.

Where to Hang Trail Cameras

In this magical deer hunting month, the best trail camera setup location is on deer scrapes – either natural or mock scrapes. Bucks and does both start using scrapes heavily in October to communicate breeding statuses, which make them great focal points for trail cameras. If you can find a scrape (or make a mock scrape) downwind of a doe bedding area or within a funnel to a food source, you can be pretty confident you will catch bucks using it.

Trail Camera Settings

This is when trail camera tactics really matter for hunting purposes. Since your trail cameras will likely be located on scrapes, using photo bursts or videos are a good way to get great shots of the bucks in your area. Videos of bucks rubbing licking branches or making a scrape are exciting to watch! Also, make sure you know how to hide a trail camera – keep them well camouflaged with brush and off to the side of approaching trails so you don’t spook approaching deer. Check your trail cameras often enough to know what deer are there, but not enough to pressure them.

November Trail Camera Schedule

Conditions

In most of the Midwest and even parts of the south, November means one thing for deer hunting: the rut. During this time, bucks tend to make mistakes, which means you can have a good chance to shoot one. Many a buck has been led to his doom by following a hot doe. The weather also typically takes a nose dive this time of the year, producing very cold temperatures and maybe even snow. Deer will really key in on high energy (carbohydrate) foods, including any remaining nuts, apples, corn, beans, turnips, and cereal grains.

Where to Hang Trail Cameras

Like October, deer scrapes can still produce some great trail camera pictures since bucks are actively seeking does. Food plots can occasionally still catch bucks during the day if your property is very unpressured and secluded since does will still feed and they attract bucks. But if you’re using trail cameras on public land or you have a smaller pressured property, scrapes are the way to go. Funnels between bedding areas and food sources are also good, especially if you take habitat and topography into consideration.

Trail Camera Settings

For November, you really need to know how to set up a trail camera. Bucks are usually hot on the hooves of any estrous doe they find, so the usual trail camera settings may not work well. The pace is fast, and you may miss the action if you don’t take the time to do the right settings. With a 6 photo burst or a 2 minute video, you can be sure that any doe that passes through will trigger the camera, but you will also catch the buck following her.
Additionally, just like October, you should position the camera higher (about 6 feet off the ground) so it is slightly out of a deer’s immediate view. Use a stick behind the top of the camera to position it downward. Also, keep it angled about 45 degrees to trails approaching scrapes so you don’t spook the deer you want pictures of.
As far as how long to leave a trail camera out in November, check them sparingly so you don’t spook deer, but often enough to know where you should be hunting. A good way to do this is to set up cameras near your access trails so you can easily check them while you enter or leave a tree stand location.

December Trail Camera Schedule

Conditions

This the beginning of the hardest time in a Midwest whitetail’s life: winter. Cold weather, biting winds, snow, and a decrease in high quality food all work against them. In southern areas, there may yet be good food sources available for deer, but there’s definitely a change. In addition, most bow hunting seasons are still open and some late season muzzleloader hunts may also open, which can pressure them. While bucks are weary and worn down from the rut, they will still feed with does and may breed any that come into estrous late, but food becomes the priority for them in December. You may also want to harvest does for meat at this point in the season since it will be your last chance until next year.

Where to Hang Trail Cameras

Since deer are transitioning to late season food sources (such as standing corn/beans, green cover crops, or turnips), the edges of these fields and trails leading to them are the best spots to hang trail cameras in December.

Trail Camera Settings

For the last calendar month of the year in open field settings, you should switch your trail camera settings back to the time lapse function. You can choose the interval of how often the camera takes pictures and also what time of day it takes them (e.g., 2 hours before dusk, etc.). Hang it higher in a tree so that you can see the whole field, which may mean hanging it 10 feet up in some cases. In the dusk example, remember to aim it northeast so it’s looking directly away from the setting sun. This allows you to see exactly how deer are using the field and moving across it.

January Trail Camera Schedule

Conditions

January is a tough time for whitetails. Bucks have been running all over their region chasing does down and fighting other bucks, not to mention dodging natural predators and us. During all that activity, they seldom stop to eat much either, which means they lose a substantial amount of body weight right during the coldest time of the year, when they need it most.

Where to Hang Trail Cameras

In the mid-winter months, food plots and fields with standing agricultural crops (corn, soybeans, etc.) are some of the best places to hang trail cameras. Deer are looking for calories to help fuel them throughout the winter, and these crops will do that. Hanging a trail camera on a trail entering these areas also allows you to see what’s dropping for early shed hunting purposes.

Trail Camera Settings

In winter, you will face two battles with your trail cams. One is the cold – it doesn’t take long for temperatures below zero to drain your battery life. The other is the snow – make sure your cameras are mounted to the tree or post above the snowline (4 to 5 feet is better than the usual 2 to 3 feet). Also, all the snow glare can make your photos turn out badly, so face them north to avoid the low southern sun.
Because of the uphill battle against the cold and snow, you may want to check your cameras pretty regularly (every few weeks) if you want them to consistently take pictures. Otherwise, you may find that you arrive and your camera is buried in snow and has dead batteries.

February Trail Camera Schedule

Conditions

As with January, February is a hard month. In most areas, even standing crops can be picked over by now, forcing deer to rely on natural woody browse as their sole food source. Deer are also battling some of the coldest temperatures of the year, which means they seek thermal cover (e.g., thick spruce plantations, tall grasses, gullies out of the wind, etc.) whenever they’re not feeding.

Where to Hang Trail Cameras

If there are still crop food sources available, these are still the best places for trail cameras. If you find that the deer have switched to feeding on browse in a certain area, try putting a trail camera on the trails leading from bedding areas to the browse. The trails are very easy to follow in the snow!

Trail Camera Settings

Again, you will be facing the cold and snow in February, so hang your cameras higher than usual and check them regularly. Also, keep the trail camera placement facing north.

March Trail Camera Schedule

Conditions

While southern hunters are out enjoying the woods in March, it is more or less the same as the other winter months in much of the Midwest, but it does offer a glimmer of hope. Temperatures start to climb and the snow pack may be melting slowly away. This can be one of the worst times for whitetails because they have browsed most high preference browse by now, but it’s too early for new growth yet. The melting of the snow may also reveal shed antlers for you to find.

Where to Hang Trail Cameras

It seems most typical feeding areas are not attractive anymore and bedding areas are not easily accessible without spooking deer regularly. While that doesn’t matter for hunting purposes, you don’t want to stress the deer herd when they’re at their most vulnerable. Plus, if any bucks are still carrying antlers you would like to find, bumping them off of your property won’t help with that effort. Deer trails, especially where they cross a farm lane or hunting property road are fantastic. You can easily sneak in to check your cameras regularly without disturbing them, and keep tabs on when the deer are shedding their antlers.

Trail Camera Settings

Since you’ll be using your camera on a deer trail, you need a relatively fast burst of pictures to capture the action as they move through. Alternatively, you could use the video mode too.

April Trail Camera Schedule

Conditions

April is the turning point for the Midwest, as spring starts to slowly appear. The deep and shaded parts of the forests still contain very deep snow, but open areas melt fairly quickly. Deer may feed on newly exposed vegetation, but also still browse on whatever they can find.

Where to Hang Trail Cameras

Deer trails and small openings are some of the best places for trail cameras this time of year. If you’re located further south, then perennial clover food plots and alfalfa fields will likely be greening up by then, and the deer will definitely be spending time in them. Plus, you have the bonus of scouting turkeys for spring turkey hunting with your trail cameras at the same time.

Trail Camera Settings

In open fields, you shouldn’t have to worry about the snow anymore and there’s no growing vegetation that will interfere with the pictures, so you can resume your trail camera mounting height at about 3 feet off the ground to get a good deer eye level shot.

May Trail Camera Schedule

Conditions

May is a very welcomed rest for whitetails because all kinds of natural vegetation starts growing like crazy again, including lush forbs, grasses, and tender new buds and twigs. Providing perennial clover fields on some part of your property is a great way to start feeding deer as soon as the weather warms up. Does are likely to give birth to fawns this month or the next, and bucks start to lump together in bachelor groups for the summer.

Where to Hang Trail Cameras

In the early spring, it’s tough to beat lush green fields and food plots for watching does and fawns on trail cameras. Unless bucks have a distinct marking on them, it will probably be too early to start identifying any prior year bucks until their antlers grow back. Another good spot to hang your cameras in spring is a mineral site. Bucks, does, and fawns will all stop by mineral sites from spring through fall.
One benefit of using trail cameras in the spring, especially along field edges or on mineral sites tucked into the cover, is that you can scout for turkey hunting still, and catch all kinds of other animals on camera, including black bears, foxes, bobcats, grouse, and many others.

Trail Camera Settings

This time of year, you don’t have to necessarily worry about how to program a trail camera. You can really use whatever trail camera setting you want. If you’d like to get some videos of young fawns playing around in the fields, this is a great time to do it. If you’d rather just take pictures, you can set the delays and intervals to whatever you wish. In all likelihood, intel you get this time of year won’t tell you a whole lot about how to hunt next season. But if you’re a trail camera addict like us, you will just enjoy getting all kinds of great pictures.

June Trail Camera Schedule

Conditions

When June hits the calendar, it’s time to start thinking about summer trail camera strategies. Deer will start hitting food sources and bedding areas pretty consistently throughout the summer. Bucks continue to build up their bodies and antlers by eating high protein foods and does need calories to keep up their milk supplies to feed their fawns. In highly productive areas, it’s not uncommon for a doe to support twins, so he needs to keep up the food consumption.

Where to Hang Trail Cameras

It’s true that deer will reliably hit food sources hard in the summer, but food sources can be very scattered this time of year with all the abundant lush food available. Since there’s a lot of cover and no pressure from us in the summer, deer will often bed short distances from ag fields and food plots, which may be a great spot to hang cameras.
However, better spots that will reliably attract deer include mineral sites and feeder stations. Where legal, these two areas will consistently pull deer in for great trail cam pictures. Corn is probably the best attractant for game cameras in these scenarios. Mounting trail cameras to a post or nearby tree is all you need to do.

Trail Camera Settings

Again, you can choose your own preferences this time of year, but start focusing your trail cameras on taking bursts of photos when triggered, so you can be sure you get a few different pictures of a deer when it shows up to a mineral site, feeder, or food plot. Bucks will start to show some antler growth, and velvet pictures are amazing to look at. Try to stay away from your cameras during the summer, checking them only when you need to refresh your mineral site or feeder. While spooking deer this time of year won’t affect hunting, why pressure deer now if you don’t have to?

July Trail Camera Schedule

Conditions

July is a similar story to June – deer continue to feed heavily to build up their fat reserves. Bucks keep building antlers and does keep fueling little fawns. The high heat and humidity may encourage deer to seek out water sources more frequently, which is definitely one of the best summer trail camera tips.

Where to Hang Trail Cameras

Also like June, food plots, feeder stations, and mineral licks are the best spots to catch most deer (including bachelor groups of bucks) on camera. If you can pair a water hole or natural water feature with a mineral site, deer will stick around even longer for better pictures.

Trail Camera Settings

As far as trail camera height, hang your trail cameras higher (4 to 5 feet) in the summer to avoid vegetation from blocking views, or occasionally visit your cameras to trim the vegetation down. Try to keep your cameras in the shade and pointed north so you don’t have a ton of pictures with glare.

August Trail Camera Schedule

Conditions

During the month of August, a lot of native forbs and grasses start to dry out, causing deer to abandon them a little. Fortunately, soft mast trees (e.g., apples, crabapples, plums, cherries, etc.) and hard mast trees (primarily oaks) start ripening and dropping fruit this time of year. Deer will eagerly ignore most native forbs to feed on these highly nutritious and digestible fruits and nuts. Bachelor groups of bucks will usually be pretty visible in open fields as dusk approaches.

Where to Hang Trail Cameras

If you have a grove of hard or soft mast trees that start dropping fruit, this could be a great place to hang a trail camera. Alternatively, you could place cameras on an established deer trail within a pinch point or funnel between the mast trees and their primary bedding area.
If you don’t have any mast trees on your property, mineral sites and feeder stations will still attract deer. And placing trail cameras on field edges of large soybean fields this time of year will definitely still produce some good pictures.

Trail Camera Settings

Follow much of the same advice for July (i.e., hanging cameras higher, pointing north, clearing vegetation, etc.).

September Trail Camera Schedule

Conditions

Once September hits, most bow seasons open up and it probably feels like Christmas day to you. But for the deer, it’s the start of several months of harassment and pressure from us, not to mention changing conditions. September may have heat waves here and there, but you’ll notice temperatures start to cool down a bit. Bachelor groups start to break up a bit as they start shedding their velvet.

Where to Hang Trail Cameras

For one of the last times of the year, food plots and ag fields are still a good spot to get daylight pictures of bucks. As the hunting season opens, most bucks tend to go nocturnal on many properties. Additionally, trails in between mast trees and bedding can still work well too. Just make sure the camera is pointed slightly towards the bedding area to get good afternoon/evening pictures.

Trail Camera Settings

Keep your trail cameras taking bursts of photos so you don’t miss a buck moving through quickly. Alternatively, use the Muddy Pro-Cam 20 bundle (one of the best trail cameras on the market) to take time-lapse pictures before dusk to get an idea of which deer are using the food plot regularly. If you’re bow hunting, check your cameras enough to inform your hunting locations without putting too much pressure on the deer before October.

Time to Use This Trail Camera Schedule

There’s a lot of information in this article and we hope it hasn’t intimidated you. This trail camera schedule is meant to give you some new ideas on how and when to use trail cameras throughout the year so you can have the best hunting opportunities. Good luck this season!

Best Trail Camera Strategies for Your Summer

June 12, 2017/0 Comments/in Get Muddy, Trail Cameras, Uncategorized /by Muddy Outdoors

Trail Camera Strategies to Start This Summer

If you’re anything like us, you eat, sleep, and dream about deer hunting throughout the year. If there is a winter storm coming through, we’re thinking about the rut. If we’re sweating through a summer heat wave, we’re thinking about how to get ready for opening day. If that describes your lifestyle too, you probably also enjoy watching deer throughout the year by using trail cams. There’s just something special about trail cameras and how you can stealthily keep track of the deer herd on your property without them having a clue. Sure, you could start glassing fields or summer food plots in the evenings, but that takes more time than most of us actually have. Plus, you might not have any fields near you; maybe you hunt deer in a big woods setting where you can’t easily watch wildlife. These are the situations where having a few hunting cameras hung in key spots on your property can make a big difference to your hunting strategies next fall. Here are a few trail camera strategies to get you started this summer.

SHOP MUDDY TRAIL CAMERAS

Top Trail Camera Strategies for This Summer

It’s not quite as simple as just throwing out a few trail cams in the woods and seeing what walks by. Sure, you could try that approach and you might get to see some wildlife eventually. But to get the most pictures, to get high-quality pictures, and to get information that will actually help you next fall, you need to focus on putting your trail camera in a spot that focuses deer traffic. Here are the best trail camera strategies for the summer.

Food Plots/Agricultural Fields

Food plots are great spots for getting pictures of deer for a few reasons. One, does and bucks alike need lots of calories in the spring to bounce back from the stress of winter. Throughout the summer, they need the food tonnage to build up their body weight and grow antlers to prepare for fall. This means high quality, protein rich forage! If you live in a forested area with very little agricultural food available, a single food plot is even more attractive to deer and your results will be better. Since it’s so critical for their survival, it’s probably the best place to hang trail cams on these locations.

For larger agricultural fields (e.g., corn, soybeans, alfalfa, etc.), the best location for game cameras might seem like the middle of the field where you can see the most deer. But since deer are creatures of the edge and will usually have set travel patterns throughout the summer, the best spot is generally along the field edge near a dominant trail. For smaller food plots (e.g., clover, cereal grains, brassicas, etc.), you can place a trail cam on a post in the middle of the plot without any issues. But really it comes down to just finding a spot that concentrates the activity and facing the game camera in the right direction. One thing to keep in mind is that facing cameras any direction but north will inevitably produce some glare in pictures at some time of the day.

Bedding Areas

Another reliable spot to capture deer pictures on your trail cams this summer is around their bedding area. After feeding throughout the night in destination fields or browsing in cutover areas, deer will shift to daytime bedding areas to chew their cud and rest. Often does and fawns will rest near or even within feeding areas, while bachelor groups of bucks will bed further away. Taking a quick scouting stroll from feeding areas and along main trails can lead you to bedding areas. They’re often easy to spot because of the oval depressions in the grass or weeds. If you’ve ever tackled a few habitat projects on your property, hinge cuts are great bedding areas to check out.

If you’ve designated some bedding areas as deer sanctuaries that are strictly off-limits throughout the year, try installing trail cams along trails on the fringe of the sanctuary instead. Be cautious about checking them too much towards the end of the summer when you want to really hold deer in-place. The bugs will likely be bad enough to convince you to only go once or twice the whole summer anyway. More than likely, you’ll find some small bedding areas outside of these sanctuaries too that you can set and forget until the end of the summer.

Travel Corridors

Of course, any main trails and travel corridors between the two areas above are also great spots to intercept deer movement. With a little desktop scouting, you can easily map these areas and find good potential corridors, but you likely have a few tree stands already hung in these areas anyway. Clear out the herbaceous vegetation in a spot along one of these trails so that you can get a clear trail camera picture. These small openings can also make deer pause long enough for a good picture.

When it comes to positioning your trail cams along trails, the common instinct is to place them so that the camera is off to the side facing perpendicular to the trail. Unfortunately, unless deer are really slow-moving, your camera will likely trigger too late and you’ll only get pictures of their rear end – hardly useful from a hunting perspective. Instead, try positioning your camera facing up or down along the direction of deer travel. Granted, you’ll still get pictures of deer moving away from you half the time, but you’ll get pictures of deer facing the camera the other half of the time.

Mineral Sites/Mineral Stations

Throughout the spring and summer, whitetails love to get an extra dose of minerals from the soil and plants around mineral stations. Lactating does need extra minerals to support their fawns, while Bucks need minerals to build their bony antlers. If you keep the station going for a couple years, you can easily train deer to keep coming back to it as a seasonal mineral source since fawns will be raised to use it. Eventually, the stations often become huge craters where deer have eaten the soil away. Luckily, you can easily set up a mineral site by scraping the debris away and exposing the soil in a given spot. Then you can incorporate some crushed mineral into the top inch of soil or simply place a block or rock on top of it. You can even place it on a semi-rotting stump, which will slowly absorb the minerals as well. But that’s about all it takes to set a station up.

If you’re installing one of these sites expressly for pictures, it’s best to locate it in a shaded understory area. Pictures from trail cams along fields and exposed sites often suffer from lots of glare, which greatly reduces the quality of the photos. But pictures within shaded areas can turn out crisp and clear any time of the day since light doesn’t interfere.

Water Sources

The final place that works great for trail cams are water sources, especially when paired with mineral sites. After eating something salty, we all crave a drink of water – deer are no different. Deer crave sodium due to the high amount of water they get in their metabolism during spring and summer. However, as the summer progresses and other waterholes or creeks go dry, a small water hole next to a mineral site will pull deer in. If you have natural wetlands, ponds, or streams on your property, you can easily locate mineral sites near them for the easiest solution. If you don’t have any water sources, you can easily sink a bucket, small rubber tank, or kid’s pool into the dirt to let it fill with rainwater. You can keep it cleaner by simply refilling it once you check cams. During hot summers or in southern, more arid areas, water sources can be the absolute best place for a trail camera setup, since it is such a draw for them.

How to Hang Trail Cameras and When to Check Them

Once you’ve identified the spots and trail camera strategies you want to install this summer, it’s time to actually get them out. As already mentioned, pay attention to the direction you face your cameras, as south facing cameras will get lots of unusable pictures with a heavy glare. The one time you can get away with south facing trail cams is if you are in a forested or heavily shaded area. One of the best trail camera tips you’ll hear is to check the batteries and then recheck them to make sure they are fresh. You should also generally clear out some of the tall weeds, grasses, and even some brush in the area so you can avoid lots of false triggers. It’s a really deflating experience when you check your camera to find 1,000 pictures and 900 of them are of swaying grass. You can change the sensitivity level on many cameras to reduce this problem, but it still doesn’t hurt to make a small opening in front of the lens. Bring a simple folding saw with you when you enter the woods so you can easily cut any obstacles down.

Depending on where you’re hanging trail cameras, you may want to leave a trail to get back to them. For new deer bedding areas in big woods spots, for example, consider putting out some trail markers or trail marking tacks to help you find them again. This isn’t a good idea on public land, obviously, as would-be thieves could follow your tacks/markers right to the camera. But it’s a nice option for private land.

As far as when or how often to check your trail cams, it’s a tough call. The less you check them, the less invasive it is and more discrete your spying will be. After all, if you set it and forget about it for a few months, you can basically guarantee that you won’t interfere with the natural deer movement on your property. On the other hand, if your camera malfunctions after only a week of being outdoors, you could miss out on an entire summer’s worth of intelligence, which is just a terrible feeling (we’ve probably all had it happen at some point). Besides, we all feel the temptation to check them weekly. It’s kind of like Christmas morning when you get your chip and start to glance through them on the computer. If you have fresh batteries and haven’t had any issues with your camera before, let it sit in the woods for a month or two at a time, if you can bear it. If you’re not sure about your gear or if the opportunity is too great, then you’ve got two options. You can either charge right in making lots of noise (e.g., starting a chainsaw once in a while, driving an ATV, etc.), which will push deer away well before you spook them at close range. Or you can stealthily sneak in with scent-eliminating clothing and rubber boots to be incognito. It’s up to you and how your property is managed.

Trail Camera Tips

Good luck with your cameras this summer. With any luck, you’ll get some great pictures of deer to help guide your bow hunting on opening day this fall!

Positioning your trail cameras for the best shots | Muddy Outdoors

Muddy Trail Camera Tactics | 5 Tips to get the Best Trail Camera Pictures

June 1, 2016/0 Comments/in Get Muddy, Trail Cameras /by Muddy Outdoors

Positioning Your Trail Camera for the Best Shots

We’ve all been there. After letting your trail cameras sit in the woods for weeks, it’s almost like Christmas morning when you finally get to check what’s on them. Like an excited kid, we plug the trail camera chip into our computers and open the folder. That’s when the disappointment starts. In your haste to set the camera up, you didn’t pay attention to a few basic rules of good pictures. Now you sadly scroll through picture after picture of dark, misaligned images. Those weeks of time in the field can’t be recovered either.

Most hunters use game cameras to help with their scouting efforts. They’re our eyes in the woods when we can’t physically be there to observe it all. Because they are so discrete and unobtrusive, some people even use trail cameras for security purposes, though we’ll be focusing on the hunting application here. They allow us to keep tabs on natural deer or turkey movement patterns so that we can make a more informed decision about where to hunt. Ultimately, they can help us pinpoint a mature buck’s home range and schedule, which is very difficult to do without a camera. But more importantly than all that, trail camera pictures are just plain fun and addicting to look at and collect. Trail cameras for wildlife offer a secret glimpse into the lives of wild animals, which is a rare and special opportunity. Most hunters would be just as excited about a dramatic nature scene unfolding in the picture as a mature 8-pointer strolling through.

But in order to get a jaw-dropping picture like that, you need to consider a few things before you just mount your camera on a field edge and walk away. Specifically, there are five C’s of good trail camera pictures that you’re probably missing or not thinking through fully. Let’s discuss them below.

The 5 Tips or C’s of Good Trail Camera Pictures

If you’re not at least thinking about each of these, your pictures probably aren’t coming out as well as they could be. They don’t take very long to implement, but the payoff could be huge in terms of high quality pictures. Take a moment to read through these trail camera tips so that your next pictures will be ones you’ll want to frame and put up on the wall.

Camera Angle

The trail camera angle is one of the most important pieces to keep in mind, since it will most affect how your pictures look and determine if you get any good pictures at all. Choose the wrong angle without confirming anything, and you could end up with a bunch of below-the-knee shots that nobody wants to see. Don’t mount your camera too low or too high; you’re looking for the sweet spot of about 4 feet off the ground. At this height, you shouldn’t have to adjust the angle up or down all that much, but we’ll confirm that below. You may want to keep the height lower if you’re specifically interested in turkeys or higher if you want a larger range, but four feet is a good starting point. Also, make triple sure that your trail camera is pointed at the right spot. For example, if you’re taking pictures on a mineral site, try to keep the site at the bottom central area of the camera. If you’re on a deer trail, don’t position it directly perpendicular to the trail as you’ll miss many triggers; instead, aim it either up or down the trail so you can get some approaching or leaving shots. These pictures look more unique and can show you more detail than a broadside picture anyway.

As you set the game camera up, pick your best hunch on the camera angle. Before you leave it though, do a few test pictures. Walk in front of it where you assume the deer will be, and then look at the chip using a card reader or laptop. If you’re way out of the frame, then you just saved yourself weeks of lost time.

Contrast

For the purposes of this discussion, we’ll define the contrast as the light exposure of your game camera pictures. Too little light and you won’t be able to see anything clearly, but too much light means your pictures will be overexposed and hazy-looking. There are a few things you can do to help with this issue.

The easiest one is to place your trail cameras where they won’t be so sensitive to the sunlight. For example, placing them in a shaded forest setting will moderate the light levels for you and let your trail cams take great pictures throughout the day. Placing them in an open field can work on cloudy days, but it tends to overexpose the pictures when the sun is brightly shining. You’ll also find that shadows of clouds or nearby trees could be so stark that they trigger the camera. It’s no fun looking through 300 photos of cloud shadows.

If you have a great food plot you want to keep tabs on, there are some ways to mitigate the light levels and contrast of your pictures. North is the best direction to face a trail camera, because it avoids looking right into the southerly sun. When the sun is directly above and facing into the lens, each picture will be hazy and you could have many glare issues affecting your pictures. You can actually point your trail cameras east and west, but your morning or evening pictures, respectively, will get a little washed out. Just remember that north is best.

Color

Have you ever browsed through your pictures and had an amazing shot or two? But after a closer look, you realize the colors are really off-balance and subtract from the overall picture quality.

While the contrast and light exposure discussion above is closely tied to this and will help you tremendously with getting good, vibrant colors in your pictures, there are a few other things you can do. The Pro-Cam 10 bundle is a great option if you’re looking for a solid package, as it includes the trail camera, an 8 gigabyte (GB) chip, and 6 AA batteries.

Composition

While most hunters would be thrilled to get an awesome shot of a mature buck making a scrape, think of how much better that picture could be with the right background. For example, take that mature buck and place him on a backdrop of a scenic oak flat with filtered sunlight and a pond reflecting the tree canopy. Stunning. Now place that same buck in front of an overgrown weedy field. It’s not quite the same, is it?

Obviously, not everyone has a postcard-quality property with scenic outlooks, but you surely have some spots that are better than others. Avoid areas with too much “junk” in the background (e.g., brush, blow-down, weed patches, etc.). Just keep this in mind as you set your trail cameras up, so that when you luck out with the shot of a lifetime, the background doesn’t ruin it.

Chips

No, not the crunchy kind in a bag. We’re talking about trail camera chips. It’s tempting for some hunters on a budget to skimp on this step so they can buy more low-quality chips instead of fewer high-quality ones. Unfortunately, the chip you buy can make a big difference on getting good trail camera pictures.

Obviously, you should get the chip with the most memory you feel comfortable buying so you can leave it out for weeks without worrying about running out of room. The higher resolution pictures really burn through digital real estate quickly, so an 8 GB card should be a minimum choice to start with. If you plan on taking a lot of video, a 16 or 32 GB card would be better. Also, some deer trail cameras require certain newer cards, which basically operate faster. If you were to use a lesser quality card with one of these cameras, you wouldn’t be pleased with the result.

Never delete pictures from your card while it is in your computer. You can actually affect the way your camera reads it. For best results, copy any pictures you want to keep to your computer, and format the card in your trail camera each time you install it. This removes the pictures from the card and basically starts fresh.

Positioning Your Trail Cameras

Now that you know what’s required for good trail camera pictures, you can focus on actually getting your camera mounted the right way in the field. If you’re wondering how to position your trail camera, don’t worry – it’s very simple. In more cases than not, there will be a suitable tree near where you want to take pictures. Simply attach your camera to the base of the tree. Secure a cable lock on it if you’re putting them on public land, just in case. Sometimes all the trees are leaning a little too much or there simply are no trees where you want to hang a camera. In that case, you need to get creative.

If the trees are less than ideal, you can always use a Muddy Outdoors trail camera support, which simply screws into a tree or post. This trail camera mount allows you to adjust the angle and position of the camera itself. Of course, that won’t be of any help in an open field should you feel the need to put one there. In that case, the Muddy Outdoors dual camera ground mount is your solution. Simply stick it into the ground wherever you need a pair of eyes, adjust the height from 19 to 41 inches, and attach up to two trail cameras to it on the trail camera arms. That way, you can cover two different directions and make sure you catch anything that walks by.

If you hadn’t ever really considered the five C’s of good trail camera pictures, now you should understand why they’re important and how they can affect your scouting efforts. Whether you use them in spring to watch the development of the deer herd, or only in fall to see what the big boys are doing, you want to have the best information you can get. By locating and positioning your trail cameras correctly and making sure you use high quality gear, you can be sure you’ll get better pictures than ever before. And for those who take hunting seriously, that attention to detail matters.

Spring Trail Camera Tips and Tactics | Muddy Outdoors

Get The Most From Your Trail Cameras This Spring

March 23, 2016/0 Comments/in Feeders, Get Muddy, Trail Cameras /by Muddy Outdoors

Trail Camera Tips | Trail Camera Selection, Settings, Placement, and Considerations for Spring

March is a hard and puzzling month, old man winter is confused, plants are confused, deer and turkey are confused, and you are completely lost. Plants, wildlife, and you, yourself do not even know whether or not to pull the trigger on spring activity or still lie dormant. Warm, sunny, 70 degree days one week, bitterly cold, snow storms the next is common, leaving you literally never knowing what March will throw at you. Most hunters, including yourself, are probably just breaking out of winter hibernation, and let’s face it, you were not productive were you? The most you might have achieved is getting your tree stands, ground blinds, or box blinds out of the elements over the winter, some shed hunting, but other than that you were unquestionably a dormant bear on that couch! You’re not the only one in the situation, besides other hunters both deer and turkey are in a tough transition this time of the year. During this time, it is important to act first, make the first strike on the season by getting your trail cameras out this spring and start the year’s observations. Follow these spring trail camera tactics to make the most of your cameras, your time, and ultimately your hard earned money.

Blowing the dust off, or opening the new box?

Game/trail cameras are without a doubt, one of the best management tools that a land manager can utilize. When it comes to documenting how your management implementations are progressing, a trail camera will provide information that is, in some cases, impossible to obtain otherwise. Before we dive into where, when, and how to set up your trail cameras this spring, you need to do an inventory check.

What cameras do you have? Are they still working? Are they the right camera for the situations that you will need to observe in the spring/summer?

Most likely your cameras are going downhill after a long season in the field, maybe they are still old school and lack the new features that are the standard in the industry. They might even be the reason behind the lack of bucks on your property, literally being too loud or too bright of a flash, or maybe you have mature bucks on the property, but the cameras just are not capturing all the movement! There is a lot at stake and a lot to consider. So the question is no longer if you should purchase a trail camera, but what type of camera should you purchase? There are numerous companies that make various models of cameras. Some cameras focus on trigger speeds, some feature time-lapse options, and other models feature HD video mode, or burst mode imaging. The model you choose depends primarily on what you want to know. Considering all cameras have improved their battery life and memory recently, let’s discuss their photo-capturing abilities to ensure you get the most from your unit.

For example, if you are monitoring an area to document wildlife activity during food plot maturation, a camera with a time-lapse ability will be the best option. The time-lapse option will take photos at a pre-determined interval, therefore an animal does not need to be within a certain range to set the unit off. They will be captured on film regardless of how close or far away they are. This is ideal for open agricultural fields or food plots where wildlife congregates, especially if nailing down entrance routes into the field is tough to do. On the other hand, if you are capturing images to determine a buck: doe ratio, still images work best. Most trail camera surveys require baited sites, so any camera that takes still images will be preferred, even if it has a slower trigger speed. If a camera has a not-so-great trigger speed, it should be placed over a baited site where the animal will be stationary for some amount of time. Other cameras that have lightning-fast trigger speeds can be situated on trails, funnels, and travel corridors. By using your camera in this fashion, you are revealing useful management information but also capturing awesome photos.

Trail cameras that feature video, especially with audio, are great units that can be placed in various areas that not only provide insight on the wildlife that is using a particular area, but also make neat videos. A still image of a whitetail buck working a scrape is great, but a video where you can see and hear him in action is even better. The same goes for orienting a camera in a strut zone for turkeys. Once again, a video of a gobbling tom trumps a still photo. These camera sets are sometimes located at the base of a tree, looking up at the licking branch over a scrape. This setup provides a unique angle and adds a twist to an already great video clip. This can easily be done with the use of a tree mount in order to orient the camera in an upward angle at the base of a tree.

Today’s new camera units are jam-packed with technology and can tell you just about anything you would want to know about monitoring activity on your land. But before you jump the gun into a new camera, or think you can just settle with your old one, let’s examine the situations, and the exact requirements that you will need in a trail camera for this spring.

What is spring?

The answer is easy, spring is several things, beautiful, warm, sunny, life giving…but less harsh than winter, is unfortunately not one of them. While winter zaps battery life, it also does not require too much of a camera, there is really not a lot going on especially in heavy snowfall, and just plain old cold cannot completely kill a camera. Spring on the other hand is an explosion of life. In order to capture anything and everything that can and will be of use to you, a camera that can not only capture it is required, but one that can also survive.

Spring is wet, humid, and full of critters. Water damage (rain and humidity), critter damage (ants), and even other human’s stealing the cameras are all of concern before we even dive into specific situations of trail camera use and placement. So keep this harsh environment in mind when thinking about your current trail cameras, or new cameras on the market.

Spring food plot monitoring

While all this crazy weather is going on, it is literally the perfect time and opportune moment to start your food plots for the spring. You’re crazy to think we are suggesting to plant beans or corn during this time of year (this early), but a more effective, potentially more important food source for whitetails this time of year is early clover plots. Clover plots excel this time of year, being one of the first green sprouts that are rich in protein and nutrients a pregnant doe or a budding buck will gladly devour.

Having this extremely useful plot, especially in areas where you could not reach the acreage to plant beans or corn, will allow you to pull, hold, and observe mature bucks over the spring and summer. Whether its frost seeding a plot, installing a poor man plot, or disking or tilling up a small plot, putting in clover now can be rewarding all year long. In this instance, a camera on video mode, time-lapse mode, or simple image burst will work. Given the normally small acreage of the plots time-lapse isn’t necessarily needed, but will still be advantageous. Put the trail cameras up in early spring to observe fawns and bachelor groups in spring and summer, and be sure to keep them up. The small clover plot is an ideal area to hang a set for a staging area into larger food plots in the early season.

Deer feeders

Nutritional needs fire back up after the long winter, that much needed protein and nutrients available in clover and other food plots during the spring, can be easily supplemented or added to with a deer feeder. Consequently feeding stations make perfect opportunities to observe feeder use. In order to minimize stress on a feed site, and to keep deer and turkeys coming back, a camera should be small, quiet, and have an invisible flash. Either video, or image burst works well, but set the camera on a 5 minute or longer delay in order to avoid the thousands of pictures, but still identify each visit.

Feeders unfortunately attract unwanted attention from neighbors and trespassers, so be sure any trail camera placed over a feeder is either locked on the tree, or small and compact enough to hide well.

Strut zones

If food plots aren’t on you forte, you may want to reconsider. Pacing trail cameras on or over small clover plots will most likely reveal a strut zone, or area where toms and hens will gather during spring. Clover plots are coveted by turkeys and turkey hunters during the spring. The hens will feed there and bring in the toms, which will give you an ideal spot to set up the decoy and ground blind. Besides clover plots, open fields, Ag fields, pastures, or open wood lots make perfect strut zones.

Trail camera selection and more importantly trail camera settings will be slightly more dependent on the situation you are heading off to be your opening weekend spot. If you are in heavy timber image-bursts or video mode with minimal delay is ideal to place on funnels or routes turkeys will take going into or out of food sources, or where they might end up scratching throughout the day. For the fields and food plots place the trail camera settings on time-lapse. This will end up giving you exactly where and when the toms hang out in the field.

Mineral sites

When spring annuals and food plots sprout up, minerals and slat attractants are put down. Have you ever wondered why deer and salt are so attractive to deer during spring in particular? Sure they use the traces and nutrients, but salt is what they are after. High water content in the rapidly growing plants of March, April, and May equates to a lot of water metabolized by deer, causing a need and crave for sodium.

Luckily this need creates a very attractive site, and opportune moment for a photo session. Either a video or photo burst works well with mineral sites. One thing that goes for both mineral sites and feeders is distance of the camera….to close you don’t get the entire picture and you have the potential to disturb the deer, too far and you cannot see the detail you would like. Finding a camera with a great invisible flash range, plus high MP, quality images and HD videos should be a no brainer for purchase in these scenarios.

Trails and funnels

Placing trail cameras over trails and funnels really seem to be underestimated, and for good reason. Placing cameras over mineral sites, clover plots, fields, and strut zones are so much more effective. But placing trail cameras over trails, runs, and funnels can and often will be more effective at telling you information you will rely upon. If you have deer hunted long enough, even turkey hunted long enough, you know particular things about their movements. Mature bucks, or turkeys might be camera shy when it comes to a mineral site, or field edge. But hanging a camera, the right type of camera is essential, high looking over a trail will often catch mature buck or tom movement that will otherwise go unnoticed.

Both deer and turkeys will often take the excursion approach when it comes to their daily movements. Sure, they are on patterns when it comes to spring and even more so for summer, but that does not mean they won’t take the safest route. This is why the right type of camera is important. A small, quiet, inconspicuous, and invisible flash camera is perfect for trails. A mineral site, feeder, or clover plot might be anticipated for some sort of stress (camera flash, sound, physical sight of the camera itself), the deer get used to it and the costs (stress) do not outweigh the benefits (food and nutrients). A trail can easily be wrote off if stress is involved. Keep your trails and funnels stress free all year in order to preserve them active.

So which camera is right for you?

Your next step is to blow the dust off your old trail camera, is it even working? Is it worth it to buy the batteries needed the rest of the year, is it time to take it out back and (metaphorically) put it out of its misery?

Next, decide which scenarios you see yourself needing a camera for. Are you the avid turkey hunter, fanatical deer hunter, or the passionate land owner/manager? Are you all three, like every hunter seems to be? In that case strongly look into purchasing a camera with the following requirements.

Small/Compact size
Able to be cable locked and secured
High image quality ( Trail cameras in this century should be at or above 10MP)
Photo-Image burst capability (day and night)
Time-lapse capability
Video capability (Audio included)
Invisible flash (black)
Simple operation and backlit screen (to see in low light)
Trigger delay options
Image data: time, date, temp, camera ID
Waterproof housing
Product warranty
Battery type: AAs (are easiest and have great rechargeable option)
Detection and flash range > 10-15 yards (30’-45’ at least)
Wide Detection Angle
Several mounting options: tripod, screw in, and straps

Muddy ProCamTrail Cameras at the 2016 ATA Show

(video)- Published on Jan 16, 2016, Muddy ProCam Trail Cameras at the 2016 ATA Show, Muddy’s new line of cameras for 2016, including The Pro-Cam 10 and The Pro-Cam 12.

Spring has arrived, and with it an opportunity to gather some critical information with your trail cameras. Don’t miss this opportunity due to an old camera, or an inefficient new one. Make the right choice and follow these trail camera tips on settings, placement, and considerations for this spring.