Posts

shed hunting

Increase Your Shed Hunting Success with Supplemental Feeders

How Supplemental Feeders Can Help With Shed Hunting

We’re sure you’re aware of it at this point, but shed hunting season is definitely here again. You’ve likely been getting text messages or social media updates from friends or coworkers who have found a couple shed antlers already. You’re also probably itching to get out in the woods and start looking yourself. Shed hunting can make for a really great day in the woods, but it’s always a little better when you actually find something. If you have snuck out a few times already but haven’t found anything, your luck is about to change by using these shed hunting tips. Using supplemental feeders, where legal, is a great way to provide a calorie boost for deer in your area, but it’s also a great way to concentrate your shed antler hunt. The best time for finding sheds is rapidly approaching across the country, so it’s time to consider this strategy if you’re not already.

Best Time for Shed Hunting

As we mentioned, this is just about prime time for shed hunting. People across the country have been heading afield and returning with brag-worthy deer sheds for a couple weeks now, but the action is about to really step up in most places. When to start shed hunting can be a tricky question to answer since it varies so much, but most people believe that February is the best month to find them. Technically, you could find them from December through March, but February is right in the average, sweet spot time frame for ideal shed hunting times. These trips also work well as far as post season scouting goes.

When To Shed Hunt

If you start shed hunting too aggressively and too early in the season, there is the possibility of spooking deer to other properties where they could shed their antlers instead. But if you wait too long to look, on the other hand, squirrels and mice will chew them up before you find them. If you primarily look on public land, other shed hunters could also beat you to it.  When to shed hunt is a balancing act and it always has its risks. One way to mitigate these risks is to only check out feeding areas early in the deer shed season and to be extremely stealthy while doing it. Deer will likely be bedded away from food sources, so you should be able to sneak in and check for sheds without disturbing them too much. As prime time comes, you can start pushing your search into bedding areas lightly, as most bucks should have shed their antlers at that point.

Best Places to Shed Hunt

Whitetails spend most of their time either resting in a bedding area or feeding in a feeding area. It makes sense then that you have the best chance at finding a shed antler in one of these two areas. Sometimes you can get lucky by finding one alongside a trail, but usually that only happens if a buck glances an antler off of a branch in the process.

But if you don’t have a winter food source available on your land, this can be a bit of a problem. That should be a goal to address this summer by producing some late-season food plots for the deer. But for now, there’s a way to feed and attract the deer to your property, and that’s where supplemental feeders for deer come in. Muddy Outdoors® has a 200 pound gravity deer feeder that will feed deer securely on your land. It has a waterproof lid with a locking mechanism and the spring-loaded pan system helps distribute supplemental feed only if an animal disturbs it.Feeders | Muddy Outdoors Hunting AccessoriesSupplemental feeders are attractive to deer because they offer a high-quality food source at a time when natural browse may be the only thing available to them. In addition, you get to choose what type of feed to use, whether you stick to simple cracked corn or high-protein feed specific for deer.

This concentration of deer feeding increases the chance that a buck would shed his antlers in the general vicinity. As he feeds off the pan system, he also might bump his antlers, separating them from his head in the process. While the Muddy Outdoors® feeder is not designed to be an antler trap, the support bars can act like one. In addition, you can hang a trail camera near the supplemental feeder and keep a watchful eye on the deer that come to it. When you notice the majority of bucks missing their head gear, you’ll know exactly when you should start really shed hunting hard and pushing into bedding areas.

increase-your-shed-hunting-success-with-supplemental-feeders-pic-2 (1)

Caution with Supplemental Feeding

While the option above seems like a golden solution to your shed hunting woes, there are some cautions you should take before doing it. First, feeding deer may or may not be legal where you hunt. Check your state’s hunting regulations or call a game warden to see whether you can or cannot feed them. The concern that some agencies have is that it can concentrate deer activity into such a small area and increases the chances of deer making nose to nose contact. This might not sound like a big deal, but it can increase the chance of spreading transmissible diseases like Chronic Wasting Disease (CWD) or others in prone areas.

Deer are curious animals in that their digestive system gets really good at digesting certain foods as the seasons change. For example, since woody browse is often the only food source in winter for many deer, their guts get really good at extracting everything it can from a mostly fibrous, low-nutrient food. When they rapidly switch over to eating mostly corn from a feeder, however, it can create confusion in the guts. The microorganisms aren’t there to really digest the corn, causing it to flow right through the system without giving any benefits. This essentially starves them. That being said, deer are adapted to different conditions across the country. Midwest whitetails near an abundance of corn fields will still probably eat enough corn that it won’t harm them to suddenly experience a feeder. But it’s a different story for big woods bucks that never see a kernel of corn. The key is to slowly introduce supplemental feeding so they don’t have the opportunity to essentially starve themselves. If you haven’t fed deer before and especially if you live in a primarily forested area, start introducing very small amounts in your feeder at first (e.g., 10 to 20 pounds) each week. If you slowly increase the amount you feed them each week, they should have time to develop their gut flora enough to digest the corn. Of course, time and cost are both considerations with supplemental feeding for deer. It takes time to fill a feeder each week, and the cost of keeping it stocked can be on the pricey side.

Is Supplemental Feeding Right for You?

This shed hunting season, consider whether supplemental feeding could be used on your property. For those it works for, it can be a really useful tool to pick up some extra deer antlers, and it can be a great way to concentrate those monster whitetail sheds you’ve been looking for.

Using Trail Cameras to Figure Out When to Start Shed Hunting

Increasing Your Odds at Shed Hunting with Trail Cameras

Deer hunting season has ended but another season is just starting. This season has tremendous interest right now, making it a sport all of its own. We are talking about shed hunting and its season is starting right now.

Whitetail deer sheds command huge paydays for those that find large and unique racks and are willing to part with them. More so, shed hunting has moved from a hobby, or an accidental encounter to the weekend hunter, to a necessity as more landowners take deer management seriously on their properties. Sheds also make for a nice trophy on the wall of that buck you have chased all season and expended time and resources for, even if you were unable to harvest him. Sheds also provide a record of what bucks have made it through and some information on what this season may potentially yield.

The Biology behind Antler Shedding

 To understand antler shedding, we have to start with some groundwork on what buck antlers are. Antlers are composed of bone-like tissue that starts developing in early spring. The growth phase of antler development, which goes from early summer until fall, is where a buck’s antlers are covered in a soft membrane referred to as velvet. This velvet is a layer of nutrient rich blood vessels that supplies the resources needed to build the antler mass. The nutrients, such as amino acids, minerals, proteins and others, are what many hunters and landowners try to supplement throughout the summer to promote this growth and thus yield bigger antlers.

Antlers will growth rapidly for two to four months. As fall approaches, due to photoperiods, the levels of testosterone start to increase. The increase in testosterone constricts the blood vessels around the antlers and eventually causes it to die. Remaining velvet falls off or more typically is rubbed off as a buck begins to prepare for the rut. What are left are the hardened antlers we are so interested in during deer season. Antlers stay with a buck until about the middle of winter then they drop off. This antler growth process is repeated each year for the buck’s entire life.

The antler shedding (casting) part of this cycle brings us to the biology behind shedding. The process, both the growth and casting of antlers, is controlled by photoperiods and testosterone. However, there are many factors that lead to either early antler drop or late drop such as injury and social stress. Often times these factors do not hold a significant role, which is why the shedding process happens generally the same time of year each year. The main for this again is the amount of light, or photoperiod, available at a given point in the year. During antler growth, testosterone levels rise (antler growth) towards a peak (loss of velvet) and eventually decline into as winter sets in, which signals the physiological response of antler shedding. To complete the cycle, daylight starts to increase as spring and early summer arrives and bucks begin their new antler growth.

When Do Deer Shed Their Antlers?

Traditionally, shed hunting season starts in February and wraps up around the end of March. Certainly, sheds can be found throughout the year and usually can be picked up during spring gobbler season if the rodents have not consumed them all yet. However, the main focus of shed hunting is in these two months.

While testosterone is the main factor controlling antler drop, there are several factors that can have an impact on how these testosterone levels can change. The stress put on a buck from environmental conditions such as extreme winter weather and also contributing factors like poor nutrition or injury can all lead to lower levels of testosterone and accordingly expedite the timing of when bucks shed antlers.

how-to-trail-cameras-for-shed-hunting_pic2

Bucks that shed their antlers earlier than February are typically more mature, dominant bucks. These bucks are apt to shed early because their dominance gets them more involved in the rut earlier and for a longer period of time than younger, less mature bucks. Due to this, they can be left depleted after the rut and stressed to a point where antler loss happens earlier than other bucks in a region.

Conversely, late antler drop can be influenced by several different causes. First, unbalanced deer populations can create an atmosphere where some does do not get bred during the peak of the rut. In these highly skewed deer populations, does are being bred during the second rut and beyond. Bucks hold their testosterone levels up in these areas, which leads to them delaying the shedding of their antlers until late March or April. Second, first-year fawns that reach breeding weight their first winter will come into estrous. This usually happens well after the peak rut and is the main driver of the second rut in many places. Again, situations like these will keep bucks high in testosterone longer, delaying the shedding process. Finally, high levels of competition for does can cause late antler shedding. Mature bucks that have to spare more frequently to breed does produce more testosterone, which results in a later loss of antlers.

Reasons to be Shed Hunting This Year

Besides the fact that finding sheds can be profitable if you are good at it, there are other reasons to be shed hunting this year. First, finding shed antlers can give you some information about the buck that carried them. The most obvious fact is that he is still alive. Sure, a buck that shed those antlers may still have a misfortune in the coming months but making it past hunting season is the biggest challenge. Aside from car collisions and a disease outbreak, the odds are pretty good whatever buck left those antlers will be around come next season.

In contrast, dropped antlers do not always connect to that buck living in the area. Finding a shed clearly shows that a buck has passed through here but depending on food availability, weather conditions and other factors, he may or may not be a resident buck. In areas with high-quality forage and lots of it, bucks stick around. The opposite is true when harsh winters reduce food sources and poor habitats that make bucks more transient. This is where post season scouting for deer is important. Finding a shed can help you focus post season scouting on potential hunting spots for next year.

how-to-trail-cameras-for-shed-hunting_pic3

Second, spending time shed hunting is important for deer management on a property. Those that shed hunt religiously can start to put together the growth trajectory of individual bucks. Finding the same buck’s sheds year after year can piece together what he may look like this coming year. Growth rates will vary each year but by scoring an antler shed, even just one side, and comparing that score to last year’s shed of the same buck can give you an average growth rate. This is an advantage in compiling, albeit early, a hit list for the upcoming season.

The Big Question | When to Start Shed Hunting on Your Property?

Since we are on the precipice of shed hunting 2017, when can you be sure it is time to venture out and look for sheds on your property? The best way to decide when to go shed hunting is to use trail cameras.

Trail cameras provide a means to monitor the timing of antler drop in your area. You can use cameras to pinpoint when most of the bucks have dropped their horns. Also, trail cameras can track a specific buck to find that white gold set that eluded you during hunting season. With trail cameras, you can scout an entire property and even multiple properties quickly and determine when to go shed hunting makes sense.

Shed hunting success is all about coverage. The more miles you put on the ground the greatest chance you will stumble across shed antlers. Trail cameras, however, can save you valuable time. When to shed hunt should be based on when the majority of bucks have started dropping. Use your cameras to identify when about 50% of bucks have lost their horns. Your odds of finding sheds will be much greater when you know most bucks have lost their horns.

Post Season Trail Camera Surveys vs. Shed Hunting Scouting

Similar to why you should be shed hunting, post season trail camera surveys are a way to find out what is the overall status of the deer herd in your area. The most efficient way to accomplish this is by running a trail camera survey.

how-to-trail-cameras-for-shed-hunting_pic4

A post season trail camera survey provides more valuable information than summer trail camera surveys. Results with surveys this time of year can be used for determining population estimates, age structure, sex ratios and herd health after the hunting season. All of which drive what management actions are needed this year.

The differences between a post season trail camera survey and using trail cameras for shed hunting are how the cameras are setup.

Post Season Trail Camera Survey Setup

  • 1 trail camera per 100 acres. Ideal but use your best judgment based on topography and how you have observed deer movements in the past.
  • 1 photo burst with a 5-minute The most important setting when conducting a trail camera survey.
  • Run the survey for approximately 3 weeks before pulling the cameras and proceeding with the analysis. 1 pre-bait week, and 2 weeks of actual data, making sure bait is present at the site during the whole 3 week period.

when-to-sehd-huntpic5

 Trail Camera Setup for Shed Hunting

  • Scatter trail cameras in the best places for finding sheds like food sources and bedding areas. Often trail camera density goes over 1/100 acres. This is in order to get more encounters and pictures over the entire property
  • Use a 3-8 photo burst or video setting on your Muddy Pro-Cam 12 to narrow down which bucks are shedding and to identify bucks vs. does once shed.
  • Run survey until the last buck has shed and check trail cameras every few days to determine when to go shed hunting.

when-to-shed-huntpic6

Best Places to Hang Trail Cameras for Shed Hunting

Positioning trail cameras for shed hunting is very much related to where you would place tree stands for late season hunting. This time of year bucks have reduced their core area with a focus on three main aspects; food, cover and security. Knowing this can narrow down two main areas to concentrate your trail cameras for shed hunting.

Food sources are key areas for deer in winter and one of the best places to shed hunt. Even though bucks are moving less and relying on fat reserves, they still seek out places that have late season forage. Food sources like standing corn, beans and winter food plots will all be attracting deer. Deploy trail cameras on main deer trails coming to these spots to capture bucks as they shed their antlers. If there are no remaining agricultural food sources, do not give up. The main part of a deer’s diet in winter is woody browse. Use deer sign like tracks and scat to pick out these areas as potential spots for trail cameras and ultimately shed hunting.

The trails leading to food sources are likely coming from bedding areas. If you are trying to determine where to find sheds, start with bedding areas. Bedding areas are providing cover and security in winter. Bucks will spend most of their day in these areas. Southern slopes with thermal cover and easy access to food sources outlined above are perfect locations to place trail cameras and hunting for sheds.

how-to-trail-cameras-for-shed-hunting_pic7

Putting It All Together

There are numerous shed hunting tips out there but it really comes down to dedicating yourself to shed hunting. It is a combination of an art and a science. The art is taking your time, covering ground and being able to pick out even the slightest protruding part of an antler on the ground. Where the science comes in is using trail cameras to time the shed hunting season and to isolate the most likely places bucks are hanging out in winter. Combining these two will put more antlers in your pack and support your management decisions this season.

When do whitetail deer shed antlers? It is happening right now! There are some people out there that are naturals at shed hunting. If you are like most, however, you need some help when it comes to shed hunting season. It is ok to hike through the woods in the hope that you will find sheds, but a better approach is to have a plan. Using trail cameras to identify when to start shed hunting and areas that bucks are frequenting will vastly improve your odds when it comes to searching for white gold.