tree stands for public land | Muddy Outdoors

The Perfect Tree Stands For Public Land Hunting

2 Perfect Tree Stands for Public Land

With deer season approaching you may be feeling the pressure to start figuring out your hunting properties. While some deer hunters might stick to the old routine properties and the same “killing tree” their father’s father used to hunt, you might be considering something differently entirely. This is the year you swore to tackle public land, and you might seriously be questioning whether or not that is a good move. Listen, we get it…that large chunk of forestry or that hefty section of public land calls to hunters all too often, but it takes a special hunter to hear that call and actually pursue it. Why? Besides hunting pressure, public land deer hunting is just a plain, flat-out struggle mainly due to hauling in gear great distances. The number one piece of gear that causes the most grief is the tree stand. Luckily, we have the perfect tree stands for public land hunting.

Mobile Treestand Setups | Tree Stands for Public Land
(Video) – Being mobile while deer hunting allows hunters to save money on treestands and also makes it easier to hunt different areas. The Muddy Vantage Point treestand is perfect for this application because it is very easy to hang, quiet, and packs easily together as a solid unit.

 

Tree Stands For Public Land Hunting

The number one issue with tree stands for public land hunting is weight. To get to the deer, hunters must bushwhack into the interior or far reaches of the public land. Doing this with 30+ lbs. might as well be impossible or be called “training” and not hunting due to the energy and activity required. Trimming the weight down on tree stands, in order to make them perfect tree stands for public ground is difficult, but not impossible. Trimming weight is easy, but trimming weight while at the same time keeping the stand safe and comfortable is a challenge. With this in mind, muddy has created two perfect tree stands for public land.

Light Hang-on Tree Stand and Climbing Stick Combo

The first of the tree stands for public ground is what is shown in the video above, the Muddy Vantage Hang-on. The Muddy Vantage is only an astonishing 13 lbs. which should ring beautifully in the ears of any public land hunter. In addition to this hang-on stand, a hunter will need climbing sticks. The Muddy Pro climbing sticks offer very lightweight but sturdy climbing sticks that have a single characteristic that make them perfect for public land. Together the Muddy Vantage and Pro climbing sticks are “packable”. They are designed to fit onto one another like a glove, making a quiet and comfortable design that can be slung on your back and tracked in miles without issue.

hang-on tree stands for public land | Muddy Outdoorshang-on sticks tree stands for public land | Muddy Outdoors

PRODUCT SPECS

  • CONSTRUCTION: Aluminum;
  • FOOT PLATFORM: 20″ Wide x 32″ Deep;
  • FOOTREST: Flips Back;
  • SEAT SIZE:15″ Wide x 11″ Deep;
  • SEAT STYLE: 3″ Triplex Foam, Waterproof, Flips Back, Removable;
  • SEAT HEIGHT: 24″;
  • ADJUSTABLE ANGLE: Foot & Seat Platform;
  • PACKABLE: 2 Backpack Straps Included; Designed to Pack with Several Compatible Muddy Climbing Systems (sold separately);
  • FASTENERS: 1 – 1″ Silent Cam-Buckle, 1 – 1″ Looped Ratchet Strap;
  • ACCESSORY BAG: Included;
  • STAND WEIGHT: 13 Lbs;
  • TREE SIZE: Minimum 9″ Diameter;
  • WEIGHT RATING: 350 Lbs;
  • HARNESS: Full Body Fall Arrest Harness Included

Climbing Tree Stands For Public Land

Climbing tree stands have always been a favorite among public land deer hunters. The simple combination of 2 pieces of equipment allows the hunter to quickly scale a tree without the hassle of spending a lot of time hanging stands, or climbing sticks. The issue most hunters have with climbing stands is again weight but also a struggle to climb up the tree as a result of poor design. Some climbers simply do not have the right design as far as teeth and foot straps to actually create a good climbing stand. Again Muddy, with the hunter in mind, designed and created a climbing tree stand for public land hunting.

The Stalker Climbing Tree Stand from Muddy weighs only 15lbs. as it is built from Aluminum. This feature, with the hybrid climbing chains and with well-designed tree teeth will grip the tree for a solid climb up.

climbing tree stands for public land | Muddy OutdoorsPRODUCT SPECS

  • CONSTRUCTION: Aluminum;
  • FOOT PLATFORM: 20″ W x 28″ D;
  • SEAT SIZE: 21″ Wide with Adjustable Depth;
  • SEAT STYLE: Nylon Net;
  • SEAT HEIGHT: Adjustable;
  • CLIMBING SYSTEM: 2X Hybrid Climbing Chains;
  • PACKABLE: Folds flat, 2 Backpack Straps Included;
  • FASTENERS: 2X Hybrid Climbing Chains w/ Spring Bolt Knob, 1-1″ Cam-Buckle Straps;
  • PADDING: Armrests & Seat Bar Padded for Extra Comfort;
  • STAND WEIGHT: 15 LBS; TREE SIZE: Minimum 9″ Diameter;
  • WEIGHT RATING: 300 LBS;
  • HARNESS: Full Body Fall Arrest Harness Included

If you plan on tackling public land this year then you need to the tools for the job. Whether you prefer a hang-on tree stand, or a climbing tree stand, muddy has the perfect tree stands for public land deer hunting

the right way to use hunting safety harnesses for different tree stands | Muddy Outdoors

The Right Way to Use Hunting Safety Harnesses

The What, When, Where, Why, and How of Hunting Safety Harnesses

We all probably have that old-school hunter in our deer camp every year. You know the type. They have hunted deer in the same plaid clothes, with the same wooden platform tree stands, and with the same gun for forty plus years. It’s pretty much impossible to convince them to change their ways, no matter how much you try. You can’t teach an old dog new tricks, right? Heck, maybe we’re even describing you. Nowhere is this truer than with hunting safety harnesses.

Most of the hunters in the above group would rather climb into their tree stand and hunt like they’ve done for decades. They’ve made it this long using their approach, so why stop now? At many deer camps all across the country, you’ll probably still get a fair amount of heckling for admitting you use a hunting safety harness. Not at all to bash the hunter we described above, but many don’t see the value of them and only see the potential setbacks in their minds. For example, many hunters believe that harnesses are too awkward to wear, are uncomfortable, or just take up too much space and time to hunt very effectively.

Seems legit on the surface, but let’s dig a little deeper. Is it wrong to want to add a dose of safety to an inherently dangerous activity (i.e., tree stand hunting)? While rare, a fall from a tree stand could mean a trip to the emergency room or worse. You owe it to your family and friends (not to mention yourself), to wear hunting safety harnesses when you’re hunting. And not just that. You should also be wearing one when you hang your tree stands or climb into them too. So open your minds and listen up hunters of all types.

Hunting Safety Harnesses | Muddy Outdoors Teasers
(video) – The undoubtedly most important aspect of deer hunting is safety. Besides firearms safety, climbing up in tree stands is the most dangerous part of your hunt. Stay safe on the way up, and during the hunt with Muddy’s innovative and advanced hunting safety system designs, the hunting safety harnesses in Muddy’s line is enhanced with the exceptionally high-end features and unwavering quality that it has always been known for. As tradition continues, Muddy endeavors to exceed limitations for tree stand safety and raise the bar on expectations through innovation, experience, and commitment. If you are looking for hunting safety harnesses and tree stand safety harnesses, check out Muddy’s Safety Systems Line.

 

Basic Principles of Tree Stand Safety

Taking your hunting safety harnesses and tree stand safety seriously from the very beginning is really important, for the reasons stated above. Just like with firearm safety, there are a few basic rules or principles you should always follow. The Treestand Manufacturer’s Association (TMA) has some specific safety guidelines that sum these rules up very nicely.

Understanding Your Hunting Safety Harnesses

Before using your harness, always make sure to read the manufacturer’s specific tree stand safety harness instructions about proper use and other warnings. Make sure you know how to use a tree stand safety harness before going into the woods, so you don’t have to guess at the right way to do it. Also spend time before the season starts inspecting your hunting harness for any signs of wear (e.g., fraying ends, loose stitches, etc.) and replace items as needed instead of trying to milk one more year out of it. Most people aren’t aware that these harnesses do expire at some point.

Always Stay Connected

As we stated above, it’s important to stay connected to the tree from the moment your boots leave the ground to the moment they’re back down. Any time in between, you should have at least one safety harness system connecting you to the tree, and maintain three points of contact with it (e.g., two hands and a foot, or two feet and a hand) while climbing or keep both feet on the platform while up in the tree.

The Myths of Hunting Safety Harnesses Debunked 

We mentioned a few of the concerns that some hunters have with using a hunting tree harness. But how true are they really? Let’s look at a few to check out the evidence.

Does it take a little more time to dress in a tree stand safety harness and secure yourself to a safety line? Yes, a little. But you can put your Muddy treestand safety harness on when you’re at the vehicle or house and not really even notice you’re wearing it. It just becomes part of your hunting clothes. And as far as clipping into your safety line, it only takes a few seconds with the one-hand carabiners that Muddy Outdoors® uses.

Does it add a little more bulk to your hunting clothes? Sure, but barely. Again, hunting safety harnesses are actually pretty comfortable. You can slip them on over the top of your hunting camouflage or wear it beneath. Whatever’s more convenient for you.

Won’t a safety harness for hunting just get in the way? Not if you don’t let it. For example, keep your tree strap above your head far enough so that it’s fairly snug when you’re sitting down. That will produce the shortest fall distance if you were to suddenly slip out. But if you find that too restricting (e.g., if you’d like the option to bend down or kneel), lower your strap a little until it’s where you want it to be. Similarly, if you think your harness tether strap will get in the way when you’re taking a bow shot, plan ahead. Make sure your tree stand is facing a direction you’re pretty positive the deer will come from. Rotate your body so that you keep the tether strap away from your bow arm. You can use a bow hunting safety harness very effectively.

Ask yourself this the next time you’re running late and tempted to climb into your tree stand without a hunting harness: is getting into your tree stand a few more minutes ahead of schedule really worth your life? We don’t think so either.

Different Hunting Safety Harnesses for Different Tree Stands

Depending on which type of tree stand you primarily use, you should be using a different strategy for getting into them safely. Take a look below and see the best way to install and hunt in the following types of tree stands.

the right way to use hunting safety harnesses for different tree stands | Muddy OutdoorsLock On Stands

This kind of tree stand can offer amazing hunting opportunities, due to the slim profile and element of surprise. But they can also be a little dicey to hang and hunt without using the right hunting safety harnesses. A lot of hunters hang them without any type of fall protection harnesses but then connect to the tree once they’re in it. To really be safe, you need to be connected at all times (remember the rules above?).

As you start hanging ladder sections, you can use what’s called a Lineman’s Rope that loops from both sides of your harness around the tree to keep you close to the trunk. This basically acts as your third point of contact with your two legs, freeing your arms up to pull more ladder sections up and secure them and the tree stand to the tree.

After the ladder sections and tree stand are hung and safely secured to the tree (but before you climb into your stand), you should wrap a tree strap around the tree, above where you intend to sit. The distance from your tree strap to the base of your harness should be short enough to produce a taut tether line. To this strap, you can then attach your safety line for repeated visits. Attach your tether strap carabiner to the safety line and then step into the tree stand to cut any remaining branches or firmly seat it.

Climbing Tree Stands

the right way to use hunting safety harnesses for different tree stands | Muddy OutdoorsSimilar to the lock on stand discussion above, climbing stands can be very productive to hunt out of, especially over a secluded hunting plot. But there are a few basic safety guidelines. Since you’ll be climbing the tree at the same time your stand is going up, you should use a lineman’s rope to keep you close to the tree trunk again. But that won’t necessarily stop you from plummeting to the ground. To be really safe, you could also use a tree strap that you adjust to always be above you as you climb. Attach your Safe Line to the tree strap, attach the carabiner to your harness to the built-in prusik knots on the safety line, and keep the prusik knots above you at all times. The prusik knot allows you to easily move them up and down, but will quickly tighten if you were to fall.

After each incremental step up you take, firmly seat the stand into the tree. Then raise the prusik knots and tree strap as far up as you can safely reach. Climb again and repeat. If you’re going to use the same tree during the season, you could leave your tree strap and safety line in the tree top. When you return with your climber, you can simply attach to the safety line and start climbing more smoothly.

the right way to use hunting safety harnesses for different tree stands | Muddy OutdoorsLadder Stands

While you can’t exactly attach a safety line as you’re installing ladder stands, you could use a very large lineman’s rope to hold you safely to the tree as you climb it the first time. Before you leave the ground, you should make sure that the seat is nestled tightly against the tree trunk and that the bottom straps are secured around the tree. By using a lineman’s rope around the tree stand and tree, you could have some additional security as you near the top of the stand.

Once the ladder stand is secured in place with ratchet straps, you should immediately wrap a tree strap above the stand and attach a safety line. First, you should clip into the safety line using the procedures described above. The Crossover Combo harness comes with six convenient pockets to hold gear as you’re climbing. The extra padding on the shoulders and back make it very comfortable and probably the best tree stand safety harness for hunting all day. At the end of the hunt, drop the free end of the safety line down to the base of the stand. You should attach the rope to the stand so it’s not waving around in the wind, which could get tangled in nearby brush or spook deer.

Box Blinds

If you’re hunting in a box blind or tripod, you’ve found the one exception to hunting safety harnesses, since there’s nothing to secure yourself to. In these cases, simply make sure to take your time as you climb into them. The consistent root causes of people falling out of tree stands of any type are that they were rushing to get in or out of them and missed a step, or they didn’t maintain three points of contact while climbing or descending. You don’t have to be in a hurry.

the right way to use hunting safety harnesses for different tree stands | Muddy OutdoorsIt’s Time to Use Hunting Safety Harnesses 

If you fit into the “old dogs” group above or if you just haven’t tried them before, it’s time you consider using fall protection equipment when you’re hunting; not only when you’re hunting, but when you’re hanging your stands too. It doesn’t take much time, it’s comfortable, and it could save your life.

hunting big woods bucks in wilderness settings | Muddy Outdoors

Hunting Big Woods Bucks in Wilderness Settings

Tricks and Tips for Finding and Hunting Big Woods Bucks

There’s nothing quite like a truly remote, wilderness hunt for whitetails. After traversing miles on foot, you settle into a hunting site with promising sign. You can’t hear or see any sign of humanity – nothing but the sounds of nature around you. When you do see a deer, you know it probably hasn’t seen many people in its lifetime.  That’s the beauty of hunting big woods bucks.

What is Wilderness?

While you can still find some remote wilderness areas out west and certainly further north, it’s harder and harder today to find a truly remote area in the eastern half of the United States. Development and increasing road and trail networks are shrinking the natural areas of the world. But you owe it to yourself to seek the remaining ones out. You don’t have to make a trek to Alaska to find one either. We’ll define a wilderness area here as a spot without human disturbance (e.g., building, road, or trail, etc.) within one mile. Most people aren’t willing to walk a mile through the woods to get to their hunting spot. In fact, most stay within ¼ mile of a trail. So in many ways, hunting big woods bucks opens up additional hunting opportunities for you.

hunting big woods bucks in wilderness settings | Muddy Outdoors

It might seem like going through all the extra work would actually limit your hunting opportunities. But remote areas often have “good hunting” for hunting big woods bucks for a few reasons. First, the deer there are mostly unpressured since nobody takes the time to hunt them. As long as you hunt them smartly, that doesn’t have to change either. Two, since they are unpressured, they follow pretty normal and easy-to-distinguish patterns. This makes them a little easier to hunt in the long run. And third, these areas can often act as sanctuaries for gun-shy deer. By being in the right place at the right time, you could find yourself surrounded by deer when they get pushed from the easily-accessible areas.

How to Deer Hunt in Remote Areas

Let’s look at a few details you should consider when you decide you want to start hunting big woods bucks. Whether you’re completely new to the area or you’re somewhat familiar with it, there are a few things you shouldn’t overlook.

Getting to Your Destination

Depending on where you’ll be hunting big woods bucks, you may be able to simply walk out your back door to a remote area. More than likely, though, you’ll have to drive somewhere first. You may be able to take an ATV down a trail to where you want to park it for the day, and then set out from there on foot. But no matter what, you’ll be walking. A lot. Make sure you have good hunting boots and break them in before the season starts. A mile walked through the woods is very different than a mile walked on a sidewalk. There are obstacles to navigate around and uneven terrain to trip you up. Practice with a loaded backpack in the pre-season months, so you know what to expect.

The other thing about hunting big woods bucks is that the places they live are usually very hard to get to. Not just because they are a mile back in the woods, but because they are often separated from the trail or road by a marsh, stream, or river. In these cases, the sanctuary effect is even more pronounced. Big whitetail bucks love these areas because they know they should be secure there. Make sure you bring waders or a canoe so you can cross the obstacle and get where you need to be. Again, that might seem like a lot of work to commit to for the chance to see a deer. But that’s the reason the deer hunting should be better on the other side; nobody but the ambitious wants to go through that work.

Navigating a mile back in the woods does require some basic woodsmanship skills. You should be comfortable using a map, compass, and terrain/topography features if you’re going to do this, especially if you’re in unfamiliar territory. Otherwise, wandering around a remote section of woods could turn into a very long and potentially dangerous day. Alternatively (and where legal), you could cut a small access trail or mark it with reflective pegs or flagging tape so you can find your way back and forth easily. But the problem with that is that it just opens up the possibility that someone else will follow it. Making it easier for you will also make it easier for everyone else. And the last thing you want to do is clue everyone else in on your plans to go deer hunting big woods bucks.

What Kind of Tree Stand?

During typical tree stand hunting, you can easily pack a lot of gear with and be comfortable all day. But hiking a mile or more back into the woods means your options are somewhat limited. Since you can’t carry a lot with you, you need to be able to either hunt on the ground, using a ground blind or relying on excellent camouflage clothing, or carry a lightweight climbing tree stand with you. You could also use lock on stands if you want another lightweight option. It’s critical in these situations to be able to quickly set up your hunting tree stands in the dark; but more critical than that is to do it quietly. You can quickly alert every deer around on a calm morning if you’re not careful. That would defeat the purpose of even having a tree stand for hunting big woods bucks in the first place.

hunting big woods bucks in wilderness settings | Muddy OutdoorsThe Stalker Climber is a very lightweight climbing option by Muddy Outdoors that anyone who plans on tree stand hunting can appreciate. It is crafted from lightweight aluminum and features sturdy backpack straps to haul it with you wherever you go. This versatility and ability to bring it with you on remote trips makes it one of the best tree stands for hunting.

Finding the right tree will be just as important if you’re tree stand hunting. You need to be able to see a good distance from up in the tree, and have enough openings to shoot through when the opportunity arises. Particularly when you’re bow hunting, you’ll need enough room to thread arrows through the brush. However, all of this is really hard to see in the pre-dawn blackness. For that reason, it would be much easier to do all of this if you could go out and scout before your hunting season starts, so you know what the area looks like.

Scouting whitetail deer in these areas is a delicate process. You don’t want to tromp around so much that you leave lots of human scent everywhere. That would again ruin your chances of sneaking into and hunting a remote area. The king of big buck hunting tips is to remain as invisible as possible, including when you’re scouting. Try to find out as much about the area from aerial photographs as you can, so you can target only the best-looking spots to hunt. If you find a couple promising trees that would work for tree stand hunting, you could flag them or use reflective pegs to easily find them with your headlamp. If you’re using climbing stands, you’ll also need to find a straight-trunked tree with few or no branches in the lower half in order to climb it well. Whereas, if the area you’re hunting in had lots of mature trees with branches along the trunk (e.g., white oaks), lock on tree stands may be a better option.

How to Hunt Deer

Bear in mind, you’ll have to leave very early in the morning to get to a spot and get your stand hung before daylight in one of these areas. The sheer distance and effort required is something you’ll underestimate the first couple times, so add 10-20% onto whatever time estimate you come up with. Otherwise, you’ll probably show up at your hunting tree stand after the sun is up. Similarly, it will take a long time to get back in the evening, so plan accordingly. Because they are so far away, it really only makes sense to hunt a spot like this if you hunt all day. That way, you can make the most use of the effort it takes to get there.

In order to do that and remain comfortable all day, be sure to bring along high-nutrition foods and snacks, as well as enough water. Especially if you’re bow hunting big whitetail bucks in the early season, you may also need to bring insect nets or repellents. And please don’t forget to bring a urinal bottle and toilet paper! There are no outhouses in the wilderness.

Packing Deer Out of Public Land or Wilderness

hunting big woods bucks in wilderness settings | Muddy OutdoorsIf you follow the steps above and luck out while hunting big bucks, take a moment and congratulate yourself! You’ll have accomplished something few can do. But the reality is that the real work now begins. Remember how hard the walk in was? Now you get to do it while dragging a mature buck behind you, plus your hunting gear. There are no ATVs, side by sides, or trucks to make the journey any easier. And dragging a deer across the ground for a mile can ruin the hide and introduce debris into the chest cavity, compromising the meat quality. Besides that, it’s a heck of a lot of work. The Workhorse game cart by Muddy Outdoors is a perfect companion for a trip like this. You can haul your tree stand and other hunting gear with you on the way in. And if you manage to tag out while bow hunting big bucks, the game cart is rated to 500 pounds, so you can haul the deer and your gear back out at the same time. As long as you don’t have to thread the cart through dense brush or tree cover, it’s a great option.

If you were wondering how to go deer hunting in remote areas, hopefully you’ll be more encouraged to try it now. It does take more work to hunting big woods bucks, but the reward can often be worth the effort.

Tree Stands and Hunting Blinds Preparing for Next Season | Muddy Outdoors

Tree Stands and Ground Blinds | Essential Preparation for Next Season

Spring Maintenance for Deer Tree Stands and Portable Ground Blinds

Hunting stand and blind maintenance is an afterthought for most hunters after the completion of a long deer season. Hunters are often preparing for spring gobbler or dusting off their trout rods for opening day in anticipation of warming spring weather. Spring, however, is an ideal time of year for revisiting your hunting spot and either removing or inspecting your tree stands. Take this break between outdoor activities to return to your tree stand locations, pull and/or inspect stands or prepare your pop-up ground blinds for turkey season or storage until next deer season.

Pulling Portable Tree Stands

The first thought before engaging in any activity involving hunting stands should be safety. Always approach climbing into your stand the same way, whether for a day long hunt or spring removal, safety first using proper safety belts and harnesses and general awareness on what you are about to do. Don’t take anything for granted, even ladder tree stands have risks associated with climbing and removal.

Portable stands, like hang-on tree stands and ladder tree stands, are best maintained by removing them after each hunting season. Not only does pulling your tree stands reduce weathering effects from temperature and precipitation but in some states it is illegal to keep your hunting stands on public grounds after each season. Having the stand on the ground gives you the opportunity to completely evaluate and repair all aspects of your stand and tree stand accessories such as climbing sticks or shooting rails.

Tree Stands and Hunting Blinds Preparing for Next Season | Muddy Outdoors

Maintenance Activities

  • Visually inspect your tree stands for signs of metal fatigue like stress cracks, especially in older stands.
  • Check each nut and bolt, tighten (or replace if necessary) any that may have loosen from use.
  • Proactively fight rust by priming and repainting areas showing signs of rust or parts that have been nicked or scratched from use to prevent further damage.
  • Examine cables, straps and pins for wear. Replace stand straps as needed or based on manufacturer recommendations, which is typically every two years.
  • Care for seats by checking for rips or tears. Cushioned seats are notorious for animal damage and wear faster than unpadded nylon seats.
  • Clean dirt and debris from climbing sticks, shooting rails or other accessories before storing.
  • Check safety systems for wear. Most harnesses have a lifespan of 5 years and should be replaced if older or if showing signs of wear that may impact performance.

Although safety is the most important reason for checking your hunting tree stands, maintaining stands also helps to improve your hunting experience. Rusty platforms and ladders along with loose bolts create noise that could be the difference between a successful hunt and one that sees your trophy running the other way as you move for a shot. Squeaks and other noises can be detected in stand and noted or attach your stand a few feet up in a tree at home. Move around your platform, lift the seat up and down and use the shooting rail to identify areas of noise and treat with a lubricant where applicable.

Parts that need replaced should be done with replacement parts from the manufacturer to preserve operating capability. Certain parts have specific specifications for their use and are designed for safety, using other parts may reduce safety or stand performance. Even the best hunting tree stands have a life span. Repairs can only go so far, know when a stand has exceeded its life, retire it and purchase a new one.

Neglecting Permanent Hunting Tree Stands

We all have it, our favorite deer hunting tree stand in that perfect location that you hunt year after year. Or perhaps it is a tried and true permanent stand along a field edge. Unlike portable tree stands, these stands stay out year round and often get overlooked when it comes to maintenance yet they still require upkeep to ensure safe hunts. Visually inspect for sturdiness on ladders or steps, rust on metal platforms, missing or loose bolts at connection points or worn strap on trees. Store any seats to prevent weathering or animal damage and loosen straps to allow for tree growth over the course of the growing season. Note any maintenance issues, acquire replacement parts and repair as needed so each stand is prepared for the start of next season. It is also a good idea to re-check permanent hunting stands prior to hunting the fall season to tighten straps and confirm the stand is safe and ready for your next hunt.

Ground Blind Preparation

Blinds like The Redemption Ground Blind by Muddy Outdoors are becoming more and more popular each season with hunters. Although constructed of durable, long lasting fabric these modern hunting implements still require care after each season and are often overlooked. Check tie down ropes as well as the shell itself for any signs of wear. Deer only blinds should be cleaned with a damp rag to remove dirt and grim from outdoor exposure and stored in the carry bag until next season. Prepare those that will be used in spring turkey by wiping down and checking that internal frames are fully functional.

Muddy Outdoors | Redemption Ground Blind Hub Style Set Up
(Video)- The Redemption Ground Blind by Muddy Outdoors is constructed with durable, long lasting fabric, and has extremely easy set up for reliable and portable use.

Secondary Benefits to Stand Maintenance

Unless you will be pulling your stand and opting for a new setup in the coming season, spring can be an opportunity to enhance your hunting location. The lack of vegetation gives you the same prospective you will see hunting in the fall. Take advantage and trim existing shooting lanes or create new ones by removing branches or small trees that may impeed future shots. If a portable hunting blind is more to your liking, make sure setup locations are free of debris and clear shots are available from all shooting windows. Be sure to preserve a balance between shooting lanes and concealment. Completing these activities in the spring also eliminates additional work, scent and disturbance in the critical weeks leading up to deer season. All that is left is a few snips on any new growth when you return to hang your stand or place your blind.

Tree Stands and Hunting Blinds Preparing for Next Season | Muddy OutdoorsShooting lanes are important but don’t forget about entry and exit points to your hunting spot. While pulling you stand or checking your set location, trim your trails. Clear fallen branches from winter and widen trails to avoid scent and noise that may spook game as you enter and exit during hunting season.

Reflect on the past season and determine if that tree or blind location is the best spot for success. Perhaps there is a better tree or setup based on your hunting experiences last season. Spring gives you the flexibility to analyze slowly and make decisions without the added pressure of deer season approaching and the stress of late summer heat and creepy crawlers.

Tree stands and hunting blinds are a tool and like any tool they require maintenance to perform as designed. Post season, spring-time is a great opportunity to get into the woods again. Revisit you hunting stand locations to remove and maintain your portable stands, check your permanent stands, care for blinds and spruce up your hunting locations, all in preparation for future successful and safe hunts.